Enginetech Premium Recon Rebuild Kit 99-07 Dodge-Jeep 4.7L JTEC

Starting at: $599.95

Enginetech has designed their engine kit program so there is no need to look up every individual item - one part number will cover all your needs! As with every Enginetech part sold, their kit components meet or exceed O.E. specifications! Whether it is import or domestic, they have you covered!

Includes the following products:

  • ENGINETECH P30608 Pistons Set of 8 (Ex. HO. Flat top. 1.252" CH. Coated skirt. Fits press or floating rods.)
  • ENGINETECH BB501J Connecting Rod Bearing Set (Standard OD.)
  • ENGINETECH BC502J Crankshaft Main Bearing Set (Thrust washers included.)
  • ENGINETECH S93138 Piston Ring Premium Set (1.5 / 1.5 / 3.0mm.)
  • ENGINETECH EPK124 Oil Pump (Pressure King Value Line Pump)
  • ENGINETECH CR2871 Engine Kit Gasket Set (MLS head gaskets. Includes offset lip front crank seal. Oil pan gasket not included use OCR287. Use new head bolts.)
  • ENGINETECH TS393B Timing Set (w/o sprockets. Engines w/ silent type upper chains only. Fits JTEC & NGC.)

    ***Note: Timing Sprockets & Oil Pan Gasket not included. Use OCR287 Oil Pan Gasket.

    Fits the following vehicles:

  • 2000-2003 DODGE DAKOTA 4.7L JTEC
  • 2000-2003 DODGE DURANGO 4.7L JTEC
  • 2002-2003 DODGE RAM 1500 PICKUP 4.7L JTEC
  • 1999-2003 JEEP GRAND CHEROKEE 4.7L JTEC

    Enginetech specializes in providing high performance engine pistons for engine rebuilds for domestic, import, and high performance applications. To learn more about the quality pistons provided by Enginetech

  • Enginetech pistons have superior size and weight grading within each set.
  • Enginetech pistons are manufactured with state of the art materials to match OE requirements.
  • We offer cast aluminum, hypereutectic, and forged applications.
  • Treatments such as skirt coatings, anodized heads & Ni-resist inserts are used as required.
  • Enginetech specializes in providing high performance engine pistons for engine rebuilds for domestic, import, and high performance application.

    Pistons Specifications -(Ex. HO. Flat top. 1.252" CH. Coated skirt. Fits press or floating rods. Use S93138 rings.)

  • Alloy Hypereutectic
  • Bore Diameter 3.661
  • Bore Diameter 93.00
  • Clearance 0.0017
  • Compression Height 1.252
  • Height 0.256 IN
  • Oil Ring Thickness 3.00 MM
  • Piston Compression Ratio 9.0:1
  • Piston Pin Outside Diameter 0.9456
  • Recess None
  • Second Compression Ring Thickness 1.50 MM
  • Top Compression Ring Thickness 1.50 MM

    Enginetech main & rod bearings have been the choice of rebuilders for over 25 years. About ten years ago, when aluminum bearings were first being introduced, Enginetech continued to produce the higher quality tri-metal 780 bearings. Enginetech stuck firm with the 780 tri-metal material for years because it was far superior to the early aluminum bearing technology.

    Connecting Rod Bearings Specifications:

  • Housing Bore 2.1257-2.1262 in
  • Number of Bearings 8
  • Oil Clearance 0.0004-0.0018 in
  • Shaft Diameter 2.0077- 2.0080 in
  • Wall Thickness 0.0582-0.0587 in
  • Width 0.655 IN

    Enginetech main & rod bearings have been the choice of rebuilders for over 25 years. About ten years ago, when aluminum bearings were first being introduced, Enginetech continued to produce the higher quality tri-metal 780 bearings. Enginetech stuck firm with the 780 tri-metal material for years because it was far superior to the early aluminum bearing technology.

    Main & Rod Bearings Specifications:

  • Maximum Clearance 0.0005-0.0015
  • Maximum Housing Inside Diameter 2.6927-2.6931
  • Position 1-2-3-4-5
  • Shaft Diameter 2.4998-2.5002
  • Shell Part Number M5284
  • Wall Thickness 0.0957-0.0962
  • Width 0.812

    Only the best materials are used for Enginetech piston ring sets. Our compression rings are made from the highest quality gray iron, ductile iron and high strength steel. At Enginetech, our top priority is ensuring the quality of our products. We conduct quality assurance testing on all of our products before they are sold to our customers.

    Piston Rings Specifications:

  • Bore Diameter 93.00
  • Number of Cylinders 8
  • Oil Ring Thickness 3.00 MM
  • Oil Width (mm) 3
  • Ring Outside Diameter 3.661
  • Second Compression Ring Thickness 1.50 MM
  • Top Compression Ring Thickness 1.50 MM
  • Width 2 (mm) 1.5
  • Width Top (mm) 1.5

    ENGINETECH Warranty Information:

    Stock / Standard Replacement Parts: 12 months / 12,000 miles;

    High Performance Parts: No Warranty

    Dropships direct from manufacturer.

    Item Photo


  • Add to Cart:

    • Model: ENGINETECH RCCR287HP P Recon Kit
    • Shipping Cost: 25.95lbs
    • 1Dropships direct from manufacturer
    • Manufactured by: Enginetech

    Please Choose:

    Add Additional Parts





    Main Bearings Size







    Piston Ring Size







    Piston Size







    Rod Bearings Size









    This product was added to our catalog on Saturday 03 October, 2020.

    Copyright © 2021 3rd Strike Performance. Powered by 3rd Strike Performance!