Split Second EGO SS Sensor Nut
Split Second
1
Weld nut suitable for installing EGO1 and other oxygen sensors with the standard 18mm/1.5mm pitch thread. Available in mild steel and stainless...
$12.95
Add:
Split Second EGO ST Sensor Nut
Split Second
1
Weld nut suitable for installing EGO1 and other oxygen sensors with the standard 18mm/1.5mm pitch thread. Available in mild steel and stainless...
$9.95
Add:
Split Second EGO1 O2 Sensor
Split Second
1
The EGO1 (Exhaust Gas Oxygen) sensor is a four-wire sensor that provides a very accurate output voltage which is directly correlated with air/fuel...
$95.95
Add:
Split Second EV1 Injector Plug
Split Second
1
2-position injector connector housing and two terminals. Fits standard Bosch and Ford Motorsport style injectors. Dropships direct from manufacturer.
$7.95
Add:
Split Second EV6 Injector Plug
Split Second
1
2-position injector connector housing, two terminals and two seals. Fits US CAR style injectors. Dropships direct from manufacturer.
$7.95
Add:
Split Second FC2-100 Freq Clamp
Split Second
1
The FC2-100 Frequency Clamp can limit frequency signals to either a maximum or minimum level. It is primarily used to avoid fuel cut by limiting...
$129.95
Add:
Split Second FTC1-201 Calibrator
Split Second
1
The FTC1-201 is a plug-and-play Fuel/Timing Calibrator for 4.0L Jeep applications. It controls an additional injector in order to provide fuel in...
$709.95
... more info
Split Second FTC1-202 Calibrator
Split Second
1
The FTC1-202 is a plug-and-play version of the FTC1-019D for 4.0L Jeep applications. It is designed to be used with larger injectors. The FTC1-019D...
$679.95
... more info
Split Second FTC1019D Calibrator
Split Second
1
For most Mopar applications. This unit operates in 1-cylinder mode which makes it compatible with a wide range of 4, 6 and 8-cylinder applications....
$609.95
... more info
Split Second FTC1025R Calibrator
Split Second
1
For supercharged Dodge Vipers and SRT-10 trucks. This unit has an internal 2-bar map sensor which can be used to control fuel in boost. It is...
$719.95
... more info
Split Second IAT Sensor Kit
Split Second
1
The IAT1 Intake Air Temperature sensor is often used to replace the stock IAT sensor when MAF (Mass Air Flow) kits are installed. On many air flow...
$62.95
Add:
Split Second LSC2-001 Calibrator
Split Second
1
The Enricher is a miniature electronic module that can be used to achieve fuel enrichment in both turbocharged and supercharged applications. It is...
$242.95
Add:
Split Second LSC2-002 Modifier
Split Second
1
The Modifier is a miniature electronic module that can be used to adjust a variety of signals on modified engines. It controls the gain and response...
$169.95
Add:
Split Second PSC1-001 Calibrator
Split Second
1
The PSC1-001 is a laptop programmable signal calibrator with an internal 2.5 bar map sensor. It is programmed with the Split Second R4 engine...
$289.95
... more info
Split Second PSC1-002 Calibrator
Split Second
1
The PSC1-002 is a laptop programmable signal calibrator with an internal 2 bar map sensor. It is programmed with the Split Second R4 engine...
$289.95
... more info