Categories

Solid Lash Adjuster (Lifters) 99-07 Dodge, Chrysler, Jeep 4.7L

  • Model: 47L00116 Solid Lash Lifters 4.7L
  • Shipping Cost: 15.95 shipping
  • 1Dropships direct from manufacturer
  • Manufactured by: BLE Products

$579.95

Please Choose:

Country





Add to Cart:
Description:

Dramatically improve your mid to upper RPM range power with our Solid Lash Adjusters. These Solid Lash Adjusters will improve HP in both STOCK & High Performance engines where High RPM's and high valve spring pressure is used.

Details:

  • Solid Lifter Conversion Kits
  • Made from the finest 4130 chromoly steel
  • Manufactured to exact OEM dimensions
  • Increased HP & valvetrain control at high RPM
  • Fully adjustable - No need for shims (even with reground camshafts)
  • Heat treated surface for maximum durability
  • Black oxide conversion coated
  • Available for many sport-compact applications

    The solid lifter conversion replaces the factory hydraulic lifters and comes with all necessary hardware for a straightforward installation. These Conversion Kits are perfect for anyone upgrading the factory valvetrain and/or camshafts in their 4.7L engine.

    These Solid Lifters have specific enhancements over the factory and aftermarket hydraulic units. Only the finest 8620 Aerospace and 4130 chromoly steel is used to manufacture this product. Each assembly incorporates a fine-threaded lash adjuster, which features a radiused pivot head, built to exact OEM tolerances for use with the factory rocker arm. The lash adjuster is heat treated to increase surface hardness for maximum durability & wear resistance. It is locked in place to the lifter body using an 18-8 SS jam nut. The lifter body is cryogenically treated and its outside diameter is precision machined to match the cylinder head slot and oil passage clearances. Furthermore, the assembly is then chemically coated with black oxide for lubricity, corrosion protection, and improved wear & anti-galling characteristics.

    The solid lifter conversion replaces the factory hydraulic lifters and comes with all necessary hardware for a straightforward installation. These Conversion Kits are perfect for anyone upgrading the factory valvetrain and/or camshafts in their sport compact engine.

    Horsepower

    The main reason to run this product is pure and simple... Horsepower. A solid lifter valvetrain is more consistent, opens to a greater extent, and closes faster than a hydraulic setup. This translates into better control of the valvetrain, as well as more duration spent at higher flow valve lifts. In essence, more high rpm power is found by eliminating the physical "collapse" (and resulting power loss) experienced by hydraulic lifters at certain rpm thresholds and valve spring pressure levels. The stronger your valve springs, the sooner this collapse will occur with hydraulics! Likewise, fluctuations in oil pressure will affect the operation of your hydraulic lifters, not so with this solid lifter conversion. As a result, the our Solid Lifters allow for higher spring pressures to be run, as well as, more aggressive camshaft lifts. So go ahead, REV IT UP!

    Drivability & the Dreaded "lifter tic"

    Aside from the increased top-end horsepower and potential to turn your engine faster, drivability and low rpm power are also increased by closing the valves quicker and thus keeping cylinder pressures consistently higher. Your engine will even idle better and rid itself of the dreaded "lifter tic". The loud, obnoxious "tic, tic, tic...." you hear, when you start your car in the morning, is caused by excessive valve lash. Your hydraulic lifters are designed to eliminate all valve lash. However, after time, the internal mechanism gets dirty and/or begins to stick, thus preventing the rocker arm pivot from moving upwards to do its job. The problem can sometimes be induced by prolonged periods of time. thicker oil weights, cold weather, or simply leaving your car parked for Our Solid Lifters will set the valve lash to spec and keep it there until you decide to re-adjust it.

    Lubrication

    In race applications, where the engine is operated for shorter durations, and undergoes closer inspection intervals, a simple "splash" lubricated rocker pivot is acceptable. However, for street & daily operation, where constant surveillance is both unlikely and cumbersome, a steady flow of oil to the rocker is highly recommended for obvious reasons. With that said, our Solid Lifters incorporate an oil feed with a restrictor to lube the rocker, while functioning similar to the "controlled" bleed of the OEM hydraulic units. Other solid units on the market, with unrestricted oil (passages) release the full pressure of the engine's oil system, which can effectively lower the oil pressure excessively.

    Dropships direct from manufacturer.

    Item Photo


  • This product was added to our catalog on Wednesday 04 March, 2020.

    Copyright © 2024 3rd Strike Performance
    Mobile Website by: Manor Media Group