MOPAR Heavy Duty Lifters Replacement or MDS-Delete Gen III HEMI

$479.95

Finally, a hydraulic lifter for the HEMI's that is designed for the higher horsepower application. An OEM factory part in engines making well over 700 horsepower, these lifters are our choice in all of our high horsepower applications.

These Non-MDS lifters from MOPAR will work as a direct replacement in any Gen3 HEMI engine application to include:

  • 2003-2008 5.7L Non-VVT Engines (Magnum, Charger, 300C, Ram, Grand Cherokee, Durango, Aspen)
  • 2009-Current 5.7L VVT Engines (Charger, Challenger, 300C, Ram, Grand Cherokee, Durango, Aspen)
  • 2006-2010 6.1L SRT-8 Engines (Challenger, Charger, 300C, Magnum, Grand Cherokee SRT-8)
  • 2011-Current 6.4L SRT-8 Engines (Challenger, Charger, 300C, Grand Cherokee SRT-8)
  • 2015-Current 6.2L Hellcat SRT-8 Engines (Charger, Challenger)

If you currently have MDS (Cylinder Shut Down) and are switching to these non-mds lifters in order to remove the OE MDS-Lifters which cannot support the larger camshafts and will collapse under the higher loads you will need to choose to add the lifter trays and must turn off the MDS operation in your calibration.

Typical lifespan we have seen of the MOPAR lifters is approx. 75,000 miles in the HEMI. If you are performing engine work and are nearing this mileage we highly recommend installing a fresh set of lifters while the engine is apart. Cylinder heads must be removed to replace lifters.

CA Residents: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov


Add to Cart:

  • Model: Mopar 05038784AC Hemi Lifters
  • Shipping Cost: 15.95lbs
  • 1 Units in Stock
  • Manufactured by: Mopar


This product was added to our catalog on Friday 08 June, 2018.

Copyright © 2019 3rd Strike Performance. Powered by 3rd Strike Performance!