Cardone remanufactured throttle bodies use 100 percent computerized testing of motor, throttle position sensor, and articulation to ensure reliable and consistent performance. Each unit is disassembled and every component is inspected, remanufactured or replaced to ensure a durable, high-quality product. Specialized component cleaning processes prevent the throttle bore surface from being deformedāfacilitating optimum airflow. For impeccable fit, function, and savings, order the Cardone remanufactured throttle body designed for your vehicle application.
Vehicles this item fits:
2007 CHRYSLER ASPEN
04-07 DODGE DAKOTA
04-07 DODGE DURANGO
04-07 DODGE RAM 1500
06-07 JEEP COMMANDER
2005 JEEP GRAND CHEROKEE
06-07 MITSUBISHI RAIDER
Engine Code: N, P, J
Experiencing Acceleration or Idling Issues? It Might Not be the Throttle Body!
Poor acceleration, hesitation and other idling issues can be caused by failure of a variety of parts. Use the chart below to help determine which part is causing the problem.
| Part | System | Other Symptoms |
|---|
| Throttle Body | Fuel & Air | - Dirty / Sticky Butterfly Plate - Use Throttle Body Cleaner
|
| Mass Air Flow Sensor | Exhaust & Emission | - Difficulty Starting or Turning Engine
|
| Air Filter | Fuel & Air | - Dark Filter Media
- Debris in Filter or Filter Box (Change every year!)
|
| Fuel Injector | Fuel & Air | - Fuel Odor
- Decreased Fuel Economy
- Engine Misfire (Use Fuel System Cleaner)
|
| Vacuum Hose Connector | Hoses / Lines & Clamps | - Hissing, Squealing or Sucking Sound from Cracked Connector or Hose (Use a Vacuum Tester)
|
|
Spark Plug or Spark Plug Wire or Ignition Coil
| Ignition | - Increase in Exhaust Emissions
- Visible Wire Damage
- Oil Leak
|
| Accelerator Pedal Position Sensor | Interior | - Limp Mode
- No / Delayed Pedal Response
|
Installation Tips
- Clean intake manifold mounting surface and replace Intake Manifold Gasket, if necessary.
- Inspect Air Cleaner Intake Hose for cracks and proper sealing - replace or repair with Multi-Purpose Sealant, if necessary.
- Check harness for broken wires and wiggle connector to try and reproduce the problem. Replace or clean Connector, if necessary.
- Clear all diagnostic trouble codes from vehicle computer prior to idle relearn.
- Perform OEM Recommended idle relearn procedure. Some applications may require the use of an OBD Scan Tool while others may refer to the Owners Manual.
- A relearn of idle values can be forced by disconnecting the negative battery cable for several minutes in order to clear the electronic control module's memory.
- Several minutes of idling and highway driving may be necessary to relearn idle values. Electrical loads such as headlights, AC, radio, etc. should be turned off while relearning.
- Erratic idle or engine surging after installation of replacement unit may be resolved by putting a load on the engine. If idle evens out after shifting into gear, shift back into park and check idle RPM - perform relearn if a drivability condition is present.
Not available for shipment outside the continental USA. We can not ship this to Hawaii, Alaska, or other countries.
Dropships direct from manufacturer.
This product was added to our catalog on Wednesday 01 December, 2021.
