COMP Cams Stage 2 HRT Camshaft Kit 09-23 Mopar 5.7-6.4L Hemi

HRT camshaft profiles are based on the latest "Low Shock Technology" lobe profiles. Designed to maximize horsepower, while improving stability at higher RPM. Easier on the valve springs, which increases durability and reduces load loss.

Engine Camshaft Kit, Stage 2 HRT No Springs Required CK-Kit for '09+ 5.7/6.4L HEMI

Cam Style: Hydraulic roller, OE roller

Basic Operating RPM Range: 1,900-7,000

Camshaft Use: Street/Strip

Camshaft Manufacturers Description: Best average torque and power of any sub .600 in. lift Gen IV HEMI cam tested. Runs great from 2500-6500 RPM.

Duration at 050 inch Lift: 220 int./230 exh.

Advertised Duration at 050 inch Lift: 273 int./279 exh.

Valve Lift with Factory Rocker Arm Ratio: 0.596 int./0.582 exh.

Lobe Separation (degrees): 114

Valve Springs Included: Yes

Valve Spring Style: Beehive

Outside Diameter of Outer Spring: 1.310 in.

Retainers Included: Yes

Locks Included: Yes

Valve Stem Seals Included: Yes

Timing Chain and Gears Included: No

Assembly Lubricant Included: No

Pushrods Included: Yes

Intake Overall Length: 6.800 in.

Exhaust Overall Length: 8.100 in.

Rocker Arms Included: No

Gaskets Included: No

Valve Springs Required: No

Quantity: Sold as a kit.

Notes: Fits engines with VVT. Requires the use of phaser limiter CCA-5761 or phaser lock kit CCA-5760. Custom tuning is required. The MDS system must be disabled and must be used with non MDS lifters.

Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.

Dropships direct from manufacturer.