Through an accelerated testing process dubbed the βICON1Kβ R&D program, ICON has logged over a thousand miles in the dirt pushing the 19-UP Jeep Gladiator to off-road extremes to identify limiting factors in OE components, develop products that remove these limits, and further extrapolate performance out of this vehicle. This 2.5β suspension system has been tweaked, tuned, and revised several times over the course of this ICON1K testing in an effort to provide unparalleled ride quality and vehicle dynamics for everything from rock crawling to high-speed desert running.
Suspension Kit, Coil Springs with Shocks, Stage 3, 2.50 in. Lift, Front, Rear, 19-UP Jeep Gladiator, Kit
The ICON Vehicle Dynamics Stage 3 2.5" Suspension System for the 19-UP Jeep Gladiator is designed for the driver looking to drastically improve the performance and ride quality of their vehicle. This Stage 3 system includes 2.5" lift dual rate coil springs, Vehicle Specific 2.0 Aluminum Series shocks, adjustable front upper links, tubular steel front lower links, adjustable front and rear track bars, bump stop spacers, sway bar links, and all necessary hardware to complete the installation. With this combination of components, ICON was able to increase wheel travel numbers by over 30% (3" front, 2" rear), redefining the potential of the 19-UP Jeep Gladiator. The front lower links included with this system are constructed from thick wall steel tubing, provide increased castor numbers, and feature dual durometer bushings for noise free operation, maximum articulation, and minimal bind. The Stage 3 system allows for fitment of 35" tires when used with ICON's recommended wheel specifications. For users looking to install 37" tires, an optional bump stops spacer kit (PN: 22029) is available.
Holistic Engineering - the ICON Difference: When developing suspension components for a new vehicle, ICON takes a different approach than many others. Rather than focusing in on one particular part, ICON engineers look at the vehicle as a whole, identify inherent strengths and weaknesses, and set a target for performance. With a focus on maximizing wheel travel and improving ride quality, ICON will develop components that address (and often times replace) OE limiting factors. This "holistic engineering" philosophy often results in the development of several parts designed to work together as a system to provide a balanced on and off-road performance upgrade. Because ICON is designing and manufacturing all of the components necessary to improve the performance of a vehicle from front to back, end-users can rest easy knowing they are dealing with ONE manufacturer, ONE standard of quality, and ONE awesome warranty to back it all up.
FEATURES & BENEFITS:
2.5" lift height
Fits 35" tires (37" with optional extended bump stop spacer kit PN: 22029)
3" front, 2" rear increase in wheel travel
Improves on and off-road ride quality over stock
Dual rate coil springs with lifetime guarantee against sagging/breakage
2.0 Aluminum Series shocks with vehicle specific valving
Tubular steel link arms with dual durometer bushings for noise free performance, maximum articulation, and minimal bind
100% bolt-on system makes for an easy install
βICON 1Kβ tested under rigorous off-road conditions to validate tune, performance, strength, and durability
TECH INFO:
OEM Wheels & Tires Fitment: Yes
Recommended Aftermarket Wheels: ICON Alloys | 17x8.5 w/ 4.75β BS / 0mm Offset
Recommended Aftermarket Tires: 35" x 12.50" (37" x 12.50" with optional bump stop spacer kit PN: 22029)
APPLICATION NOTE #30: AN ADJUSTABLE TRACK BAR MAY BE NEEDED TO REALIGN THE AXLE FROM LEFT TO RIGHT, OR TO ADD ADDITIONAL STRENGTH
APPLICATION NOTE #55: SHOCKS ARE FULLY SERVICEABLE. COILOVER HEIGHTS INDICATED ARE FOR A STOCK EQUIPPED VEHICLE
APPLICATION NOTE #66: 2 DOOR MODELS SIT SLIGHTLY HIGHER THAN 4 DOOR MODELS BUT REMAIN LEVEL WHEN INSTALLED
APPLICATION NOTE #120: RECOMMENDED WHEEL AND TIRE FITMENT BASED ON 19-UP Jeep Gladiator RUBICON TRIM
Ships In Multiple Boxes
SYSTEM COMPONENTS:
22025 (QTY: 1) | 19-UP Jeep Gladiator 2.5" FRONT DUAL RATE SPRING KIT
22026 (QTY: 1) | 19-UP Jeep Gladiator 2.5" REAR DUAL RATE SPRING KIT
26523 (QTY: 2) | 19-UP Jeep Gladiator 2.5" FRONT 2.0 VS IR
26524 (QTY: 2) | 19-UP Jeep Gladiator 2.5" REAR 2.0 VS IR
22027 (QTY: 1) | 19-UP Jeep Gladiator FRONT ADJ TRACK BAR KIT
22028 (QTY: 1) | 19-UP Jeep Gladiator REAR ADJ TRACK BAR KIT
22021 (QTY: 1) | 19-UP Jeep Gladiator FRONT FIXED LOWER LINK KIT
Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.
Dropships direct from manufacturer.
This product was added to our catalog on Wednesday 22 March, 2023.