Fabtech 6" Lift Kit with Performance Shocks 19-up Ram 1500 4WD

The Fabtech 6” lift kit for the new model Ram 1500 was designed to keep the stock ride and allow for a set of larger tires and wheels. This is accomplished by relocating the factory suspension with heavy duty bracketry. Lifted steering knuckles allow for proper electronic stability control function and retain near stock track width. The factory coilover shocks are retained and spacers are used to retain the stock like ride. Ground clearance is increased by using arched lower control arm crossmembers along with an integrated differential skid plate to protect the drivetrain. The factory coil springs are retained for stock load carrying capacity and are lifted with steel coil spring spacers. Rear twin tube Performance shocks provide a good street ride and can also handle offroad use.

6" Lift Kit, Performance shocks, 19-up Ram 1500, 4WD

Important Notes:
* Cannot use OEM wheel and tire.
* Will not fit factory air suspension.
* Does not fit Rebel models.
* Does not fit vehicles equipped with OEM 22" wheel, and heavy-duty bearing option.
* Must use aftermarket 20″ wheels or larger.

Included in the kit:

Extended length ductile iron steering knuckles

Thick wall tubing and 1/4″ thick steel is used to build these 6” spacers

1/4" thick steel lower control arm crossmembers, fully welded box design

1/4" thick steel front differential skid plate

Differential mounts

Sway bar drop brackets

Steel rear coil spring spacers

Rear track bar bracket

Rear Performance Shocks

Limited Lifetime Warranty

Tire/Wheel Size:

35/12.50R20 tires, 18×9 wheels w/ 5” BS w/ minor trimming

37/12.50R20 tires, 20×9 wheels w/ 5” BS w/ minor trimming

Not available for shipment outside the continental USA. We can not ship this to Hawaii, Alaska, or other countries.

Dropships direct from manufacturer.