The Zone Offroad 6" suspension system for your Ram 1500 uses strut top spacers to maintain the factory ride. Strut disassembly is required only if the optional preload spacers included in the kit are used. . This lift kit features two main crossmembers that are locked together creating a substantial skid plate. The CNC machined steering knuckles ensure proper steering geometry while reducing installation time. The rear is lifted with new Zone 3" coil springs, track bar relocation, and a rear four link relocation system. Rear Nitro shocks are included. Shock boots sold separately.
Important Notes
Not recommended for All Wheel Drive models. These trucks are typically between 1" and 3" tail high. Please measure your truck and order the appropriate rear lift height. TRX models will achieve approximately 1" of additional lift. This lift is not recommended for use on the TRX models due to possible CV shaft vibration caused by the additional lift. Instead, consider our 4" lift system for about 5" of lift or replace the TRX struts with standard struts for use with this system.
Included in the Zone Offroad 6” Dodge Ram 1500 lift kit are:
includes:
Front & Rear Crossmembers
CNC Machined Steering Knuckles
Strut Spacers
Sway Bar Links
Replacement Tie Rod Ends
Differential Skid Plate
5" Rear Coil Springs
Upper Control Arm Relocation Brackets
Rear Nitro Shocks
Shock boots sold separately.
Covered by the 560plus Factory Protection Plus Program for vehicles less than 5 years old from the date of manufacture and the mileage is less than 60,000 miles.
Tire/wheel sizes you can use with this kit:
Tire Size: 37x12.50 on 17x8, 4.5" BS or 18"-20"x9, 5" BS
Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.
Dropships direct from manufacturer.
This product was added to our catalog on Tuesday 30 November, 2021.
