COMP Cams HRT Stage 3 Camshaft 10-up Gen 3 Hemi 5.7L, 6.2L, 6.4L

COMP Cams HRT Stage 3 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT Stage 3 cams receive the Micro Surface Enhancement (MSE) finishing process as a standard feature to increase strength and performance by reducing surface peak roughness. This also provides noticeable improvement in the effective load bearing area, thus, allowing for much higher loads. If you want to maximize horsepower while improving stability at higher rpm, COMP Cams HRT Stage 3 cams are the right call.

Camshaft, HRT Stage 3, Hydraulic Roller Tappet, RPM Range 2,100-7,400, Advertised Duration 277/283, Dodge, Chrysler, Jeep, RAM, Hemi, Each

Cam Style: Hydraulic roller tappet

Camshaft Use: Street/Strip

Basic Operating RPM Range: 2,100-7,400

Intake Duration at 050 inch Lift: 224

Exhaust Duration at 050 inch Lift: 234

Duration at 050-inch Lift: 224 intake. /234 exhaust

Advertised Intake Duration: 277

Advertised Exhaust Duration: 283

Advertised Duration: 277 intake/283 exhaust

Intake Valve Lift with Factory Rocker Arm Ratio: 0.632 in.

Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.619 in.

Valve Lift with Factory Rocker Arm Ratio: 0.632 intake/0.619 exhaust

Lobe Separation (degrees): 116

Computer-Controlled Compatible: Yes

Valve Springs Required: No

Quantity: Sold individually.

Camshaft Manufacturers Description: Best HP of any stock hydraulic roller cam by taking full advantage of Apache high lift airflow. Runs great from 3,000-7,000 RPM. Low shock profiles and #7230 valve spring allow 7,500 RPM+. Requires either the phaser limiter (#5761) or phaser lock (#5760).

Notes: Fits models with VVT. This cam requires custom tuning, disabling the MDS system, using non-MDS lifters and requires the use of a phaser limiter CCA-5761 or a phaser lock kit CCA-5760.

Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.

Dropships direct from manufacturer.