This 4" lift kit by Zone Offroad for the Jeep Grand Cherokee ZJ provides dramatic improvement in both ground clearance and wheel travel. Massive lower control arms are greasable and made from 1-3/4" x 1/4" wall DOM tubing to correct front alignment and improve suspension control. Front and rear coil spring, transfer case drop, rear pinion cams that rotate the rear pinion, front extended sway bar links with urethane bushings, rear track bar brackets to center the axle, 3" bump stop extensions and 4 Nitro shocks specifically valved for this application are also included.
Suspension Lift Kit, 4", With Nitro Shocks, 93-98 Jeep Grand Cherokee,
Important Notes:
Measure front driveshaft prior to installation. Over 24.5" does not require modification. 20"-24" may require a change to Spicer type joint if vibration occurs. If less than 20", a Spicer type joint is required and vibration may persist.
If equipped with a CV type front driveshaft mount at the pinion, then a new Spicer type u-joint is required to eliminate vibration.
Vehicles with V8 may not achieve stated lift height. Front 3/4" coil spacer is a common addition to accommodate the additional engine weight.
Tire Size: 32x11.50, 4.5" BS
Dropships direct from manufacturer.
This product was added to our catalog on Friday 07 May, 2021.