Ross Forged Pistons 99-07 Mopar 4.7L V8 3.70 bore, 10.68:1 CR

  • Model: Ross 47ROSS Mopar 4.7L Pistons
  • Shipping Cost: 30 shipping
  • 1Dropships direct from manufacturer
  • Manufactured by: Ross Pistons

Starting at: $1,300.00

Please Choose:

Basic Options:




Combo Deals:







Add to Cart:
Description:

3rd Strike Performance brings you the ONLY 4.7L Forged aftermarket pistons available ANYWHERE!

We only have one set of these left! When they are gone, there will be no more...These pistons are 3.70 bore, 10.68:1 Compression Ratio, 67cc Head Volume, 9.1cc Domed.

Drawing on nearly 30 years of piston design and manufacturing for all forms of motor sports, ROSS Racing Pistons has met the continual need for the most advanced forged pistons in the racing industry.

NOTE: These pistons are made to be used with our 3rd Strike Performance SCAT RODS! They will NOT work with the factory RODS!!!

These kits are priced with your choice of Pistons (FLAT/DOME/DISH) & Wrist Pins. This piston kit comes with everything you need as far as pistons go. RINGS NOT INCLUDED but can be added to the order. You can use these pistons on your stock Rods, or an aftermarket forged Rods. Your Stock Pistons only have 1/8 of an inch between the piston top and the top ring. This is VERY bad if you want to run Boost or any decent amount of Nitrous "SAFELY" without worrying about overheating and seizing the top ring.

Rest assured that ROSS has you covered.

Custom pistons are not returnable for refund or credit regardless of circumstances, unless the customer submitted a written purchase order and pistons do not meet the requirements of the written purchase order. Do not attempt to install ROSS Racing Pistons before reading the instructions. ROSS Racing Pistons reserves the right to make changes in design, materials and specifications, or to make product changes without incurring liability or obligation with respect to similar products previously manufactured.

Modifications:

**NOTES:

1) 10:5 Pistons are not a "TOSS IN, BOLT ON PISTON" your machine shop will need to do the math and verify piston to valve/head clearance. You need to verify PISTON to HEAD/valve clearance and insure you have the proper clearances. Selecting the proper head gasket thickness will be key.

Have your engine checked by your machine shop for MAX "SAFE" bore.

Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.

Dropships direct from manufacturer.

Item Photo


This product was added to our catalog on Thursday 05 March, 2020.

Copyright © 2025 3rd Strike Performance
Website Designed by: Manor Media Group