Categories

Edelbrock Performer RPM Cylinder Head 5.2L, 5.9L Magnum

  • Model: Edelbrock 61779 Cylinder Head
  • Shipping Cost: 25.95 shipping
  • 1Dropships direct from manufacturer
  • Manufactured by: Edelbrock

$1,159.95

Please Choose:

Country




Add to Cart:
These Performer RPM Chrysler Magnum heads give substantial performance improvements for street/strip and off-road performance use. They offer an easy bolt-on engine upgrade with substantial out-of-the-box performance gains. Stock Magnum intake and exhaust flange and port locations make these heads an ideal choice for use with stock equipment as well as the new RPM Air-Gap manifold. These heads feature a slight increase in compression over the factory heads, offer more flow than stock, and accept adjustable aftermarket rocker arms. These heads are available in bare or assembled versions; hardened pushrods are required.

Cylinder Head, Performer RPM, Aluminum, Assembled, 58cc, 176cc Intake Runner, Dodge, Jeep, 5.2, 5.9L, Each

  • Combustion Chamber Volume (cc): 58cc
  • Intake Runner Volume (cc): 176cc
  • Exhaust Runner Volume (cc): 75cc
  • Cylinder Head Style: Assembled
  • Cylinder Head Material: Aluminum
  • Intake Port Shape: Rectangular
  • Intake Valve Diameter (in): 2.020 in.
  • Cylinder Head Finish: Natural
  • CNC-Machined Combustion Chamber: No
  • CNC-Machined Intake Runner: No
  • CNC-Machined Exhaust Runner: No
  • Intake Port Location: Standard
  • Exhaust Port Location: Standard
  • Intake Valves Included: Yes
  • Exhaust Valves Included: Yes
  • Exhaust Valve Diameter (in): 1.600 in.
  • Valve Springs Included: Yes
  • Maximum Valve Lift (in): 0.580 in.
  • Outside Diameter of Outer Spring (in): 1.460 in.
  • Damper Spring Included: Yes
  • Number of Springs Per Valve: Single
  • Retainers Included: Yes
  • Retainer Material: Steel
  • Locks Included: Yes
  • Lock Style: 7 degree
  • Valve Stem Seals Included: Yes
  • Valve Stem Seal Style: Positive stop
  • Rocker Arm Studs Included: Yes
  • Rocker Arm Nut Thread Size: 3/8-24 in.
  • Rocker Arms Included: No
  • Rocker Arm Nuts Included: No
  • Guideplates Included: Yes
  • Guideplate Pushrod Size: 5/16 in.
  • Valve Cover Mounting Style: Perimeter bolt
  • Accessory Bolt Holes Drilled: Yes
  • Intake Valve Angle: 18
  • Valve Guides Included: Yes
  • Valve Guide Material: Manganese bronze
  • Valve Seats Machined: Yes
  • Valve Seat Machine Style: 3-angle
  • Valve Seat Material: Ductile iron
  • Steam Holes Drilled: No
  • Oiling Style: Through head
  • Machined for O-Ring: No
  • Heat Crossover: No
  • Quantity: Sold individually.

    Notes: With springs for hydraulic flat tappet cams, Requires hardened pushrods, EDL-9638. Match with Edelbrock head gasket sets. Recommended spark plugs 14mm x 3/4" reach with flat gasket seat (Champion RC12YC). Exhaust flanges in stock location to allow use of stock exhaust if desired. Accepts widely available small-block Chevy adjustable rockers 1.6 ratio and classic valve covers EDL-4177 and EDL-41773

    Special Attention: Valve springs are designed for use with a flat tappet camshaft.

    Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.

    Dropships direct from manufacturer.

    Item Photo


  • This product was added to our catalog on Wednesday 23 January, 2019.

    Copyright © 2024 3rd Strike Performance
    Mobile Website by: Manor Media Group