COMP Cams HRT Stage 1 Camshaft 10-up Gen 3 Hemi 5.7L, 6.2L, 6.4L

  • Model: COMP Cams 201-300-17 Hemi Cam
  • Shipping Cost: 15.95 shipping
  • 1Dropships direct from manufacturer
  • Manufactured by: Comp Cams

$559.99

Please Choose:

Country




Add to Cart:
COMP Cams HRT Stage 1 camshafts use the newest and most advanced lobe designs in order to produce some of the highest average power and torque available. The "Low Shock Technology" features lobe profiles designed to maximize horsepower while improving stability at higher engine speeds. These profiles are also easier on the valve springs, enhancing durability and reducing load loss. COMP Cams HRT camshafts receive the Micro Surface Enhancement (MSE) finishing process as a standard feature, which increases strength and performance by reducing surface peak roughness and provides a 250 percent improvement in the effective load bearing area, allowing for much higher loads. All HRT Stage 1 camshafts do not require upgraded valve springs.

Camshaft, HRT Stage 1, Hydraulic Roller, 1,700-6,500 Range, 0.520./0.515 Lift, 114 LSA, Dodge, Chrysler, Jeep, RAM, Hemi, Each

  • Cam Style: Hydraulic roller tappet
  • Camshaft Use: Street/Strip
  • Basic Operating RPM Range: 1,700-6,500
  • Intake Duration at 050 inch Lift: 216
  • Exhaust Duration at 050 inch Lift: 222
  • Duration at 050-inch Lift: 216 intake. /222 exhaust
  • Advertised Intake Duration: 269
  • Advertised Exhaust Duration: 271
  • Advertised Duration: 269 intake/271 exhaust
  • Intake Valve Lift with Factory Rocker Arm Ratio: 0.520 in.
  • Exhaust Valve Lift with Factory Rocker Arm Ratio: 0.515 in.
  • Valve Lift with Factory Rocker Arm Ratio: 0.520 intake/0.515 exhaust
  • Lobe Separation (degrees): 114
  • Computer-Controlled Compatible: Yes
  • Valve Springs Required: No
  • Quantity: Sold individually.

    Camshaft Manufacturers Description: No Springs Required (NSR) Stage 1 Grind for 5.7L Gen. IV Hemi. Great mid-range torque with excellent power. Perfect for heavier vehicles, has great throttle response.

    Notes: Fits models with VVT. This cam requires custom tuning, disabling the MDS system, using non-MDS lifters and requires the use of a phaser limiter CCA-5761 or a phaser lock kit CCA-5760.

    Not available for shipment outside the continental USA. We cannot ship this to Hawaii, Alaska, or other countries.

    Dropships direct from manufacturer.

    Item Photo


  • This product was added to our catalog on Friday 12 July, 2019.

    Copyright © 2024 3rd Strike Performance
    Website Designed by: Manor Media Group