Kicker Audio IQ1000.5 Q-Class 5 Channel Amplifier 1000 Watts

$899.95

IQ1000.5

The IQ1000.5 Five Channel Amplifier is an entire system in a single, stunningly simple chassis.

At under a foot long and barely two inches high, this Class D powerhouse is ready to turn your ride into a mobile concert, with all the control and customization of a professional mixer.

The IQ1000.5 delivers 65 watts x 4 at 4Ω and 125 watts x 4 at 2Ω for the AMP1 and AMP2 Channels. The SUB channel delivers 250 watts at 4Ω and 500 watts at 2Ω.

TWEEQ™ IT

All IQ amplifiers come with the revolutionary TWEEQ tuning software. Available as a free app for PC, iOS and Android, this tuning system allows you the freedom to dial in your perfect sound – without buying or installing a separate processor.

Equipped with a simple walk-through configuration process, TWEEQ includes every tool you need to craft a truly excellent sonic environment. A graphic speaker selection menu, +/- 12dB equalizer with 31-bands, adjustable 24dB crossover and time alignment is all included for every channel of the amp. Access the Advanced settings for time delay controls, phase options, a full limiter/compressor, and input mixer to make your sound stage as unique as you are.

Want to TWEEQ your system wirelessly? Simply add the IQI Intelligent Interface and control as many as four IQ amplifiers with Bluetooth®!

Specifications:

------------------------------------------------------------------

RMS Power [Watts] AMP1 and AMP2:
@ 14.4V, 4Ω stereo, ≤ 1% THD+N : 65 x 4
@ 14.4V, 4Ω mono, ≤ 1% THD+N : 125 x 4
@ 14.4V, 2Ω mono, ≤ 1% THD+N : 250 x 2

------------------------------------------------------------------

Length [in, cm]:
11-15/16, 30.3

------------------------------------------------------------------

Height [in, cm]:
2-1/16, 5.2

------------------------------------------------------------------

Width [in, cm]:
7-9/16, 19.1

------------------------------------------------------------------

Frequency Response [Hz]:
AMPS 1 and 2: 20-20k
SUB: 25-180

------------------------------------------------------------------

Signal-to-Noise Ratio [dB]:
95

------------------------------------------------------------------

Input Sensitivity:
Low Level: 125mV-5V
High Level: 250mV-10V

------------------------------------------------------------------

Selectable Electronic Crossover:
AMP 1: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave
AMP 2: OFF/HP; Variable 40Hz–180Hz, 24dB/Octave
SUB: Variable LP 40-180Hz, 24dB/octave

------------------------------------------------------------------

KickEQ™ Bass Boost (end panel adjustable):
Variable 0–18dB @ 40Hz

------------------------------------------------------------------

"KickEQ+™ Parametric Bass Boost (Remote Control Adjustable):
Boost : Variable 0-18db
Adjustable Center Frequency : 24Hz-80Hz
Bandwidth : .5-10

------------------------------------------------------------------

Subsonic Filter:
25Hz, 24dB/octave

------------------------------------------------------------------

Remote Bass:
Yes

Graphical User Interface Control (each channel)

------------------------------------------------------------------

Selectable Active Crossover AMPS 1 and 2:
Variable High Pass and Low Pass 10Hz–20,000Hz
Ajustable Butterworth slope : OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope : OFF, 6 or 12dB/Octave

Sub:
Variable High Pass 10-100Hz, Variable Low Pass 40-200Hz
Adjustable Butterworth slope - OFF, 6, 12, 18 or 24dB/Octave
Adjustable Linkwitz-Riley slope - OFF, 6 or 12dB/Octave

------------------------------------------------------------------

KickEQ™:
Graphic 31 Band, 1/3 octave, + or - 12dB

------------------------------------------------------------------

Time Delay:
Adjustable Delay : 0-20ms
Adjustable increments : .02ms, .1 ms and 1.0 ms

------------------------------------------------------------------

Compressor:
Adjustable Attack and Release time; Adjustable 1:1 - 10:1 ratio
Adjustable Threshold, -80 - 10dB

------------------------------------------------------------------

Input Mixer:
Maps signal inputs to specified speaker outputs

CEA Specifications

------------------------------------------------------------------

CEA Power:
500 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)

------------------------------------------------------------------

CEA Signal-to-Noise Ratio:
AMPS 1 and 2:
65 x 4 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)
SUB:
250 x 1 @ 4 ohms, 14.4VDC, 1% THD, CEA-2006B (Watts)

Pasmag Reviews the IQ1000.5 Amplifier

"Back in the day, we wished for amplifiers with crossovers in them. When we got those, we wanted EQ, higher efficiency and better sound. Never satisfied, we continually demanded more and better features. Well, in case you haven’t noticed, the latest car audio amplifier offerings are becoming more sophisticated and include many features we only dreamed of just a few years ago. Right at the top of the list are the new IQ series amplifiers from Kicker."


Add to Cart:

  • Model: Kicker Audio 42IQ10005 5Ch Amp
  • Shipping Weight: 15.95lbs
  • 1 Units in Stock
  • Manufactured by: Kicker Audio


This product was added to our catalog on Thursday 14 June, 2018.

Your IP Address is: 54.166.228.35
Copyright © 2018 3rd Strike Performance. Powered by 3rd Strike Performance!